Accessories for Driveway Alarms

• Indoor/Outdoor motor driven design
• UL Listed for fire protective service
• Polarized models with wide listed voltage range using filtered DC or unfiltered FWR input voltage.
• Terminals for fast in/out field wiring.
• High sound dB output with low current draw.
• Built-in trim plate for a clean flush mount installation.
• Input terminals for field wiring using AWG 12 to 18.
• RFI and EMI noise suppression element built-in.
• Red color.
• 6 Inch Bell.

• Know how many entered or left your driveway.
• Plugs into the side of the receiver.

• This unit can turn on lights & ring remote door bells
• Plugs into the side of the receiver and then into a 110V AC plug and transmits a signal through your house wiring to activate the Remote Chime or the Lamp Module.

• Will work anywhere in your home.
• Requires X10 Interface module above.

• Just plug in your lamp It will turn on a lamp when the driveway alarm is tripped.
• Requires X10 Interface module above.

• Plugs into the side of your Driveway Alarm receiver.

• Extra loud and you may use out doors
• Wires into the receiver

FEATURES

• Works great with our Driveway Informer and the DA50 Entrance Alert.
• Perfect for "informative" household burglar alarm use and many other applications.
• Incorrect polarity cannot damage circuit or draw current.
• Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a backup battery, as the battery is drained the strobe light will continue to function.
• Low current consumption with long operating lifespan of over
• 300 continuous hours (2,000,000 flashes).
• Includes choice of amber, blue, clear, or red lens.
• Lens is made of high-impact resistant acrylic, case of high-impact resistant ABS plastic.
• Use in temperature ranging from -22OF(-30OC) to 140OF (60OC).
• For 9- to 28-Volt use.

SPECIFICATIONS

• CIRCUITS
  All solid-state
• INPUT CONNECTIONS
  Red/Positive
  Black/Ground
• LEADS
  #20 Gauge UL listed
• ELECTRICAL PROTECTION
  Reverse polarity protected
• OPERATING LIFE
  Over 2,000,000 flashes (300 hours continuous)
• ENVIRONMENT
  -22OF (-30OC) to 140OF (60OC)
• BASE
  High-impact black ABS
• LENS
  High-impact resistant acrylic.

• Plugs into the side of the receiver.
• Produces a buzzing sound.

• This option allows for the use of multiple power sources.
• A quick release system provides for a 110 volt source, 12 volt source and 9 volt source.
• Ideal for campers and situations where 110 volt is not available.
• This option must be factory installed.